Ask Your Question

Sluggish GNOME/Wayland desktop on 2015 i7 Macbook

asked 2018-10-11 12:59:55 -0500

wirehead gravatar image

updated 2018-10-11 17:05:10 -0500

Hi, folks -

I used to run Fedora on a 2013 i5 Macbook, and performance was good. Recently my company bumped me up to a newer laptop since I was having issues with only having 4GB RAM on my old machine. On the new machine, the desktop just feels sluggish. Moving or resizing windows seems to render at maybe 7 or 8 FPS and feels jerky.

Videos play fine, even fullscreen - it seems to just be GNOME itself that is sluggish.

I am also having issues with the system refusing to stay suspended when I close the lid - it repetitively wakes up and goes back to sleep (and gets quite hot!). I am unsure whether that is related - I mention it because during the suspend/wake cycle this message is logged at each suspend and each wake:

journal[1519]: Failed to set power save mode for output eDP-1: Permission denied

I'm wondering if that might cause the GPU to remain in a throttled state or something?

I've verified that I am using the proprietary Intel driver, and glxgears runs around 10000FPS if I set vblank_mode=0, so performance seems normal, I think?

Additionally, the intelgputop utility only shows about 6% to 10% load at idle, and goes up to perhaps 35% to 40% if I rapidly drag windows all over the screen - but it's still jerky. I have >8GB ram free, htop shows overall about 6% CPU usage and a load average of 0.5 to 1.5 (on an 8-thread machine).

Some info about the system - I am sure more is needed but I'm not terribly experienced troubleshooting GUI issues - I mostly use *nix in an ssh session, so I'm not sure exactly where to look for problems.

 cat /proc/cpuinfo | grep 'model name' | head -n1
model name  : Intel(R) Core(TM) i7-4870HQ CPU @ 2.50GHz

    lspci -vv -s 00:02.0
    00:02.0 VGA compatible controller: Intel Corporation Crystal Well Integrated Graphics Controller (rev 08) (prog-if 00 [VGA controller])
        Subsystem: Apple Inc. Device 0147
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

glxinfo | grep OpenGL:
    OpenGL vendor string: Intel Open Source Technology Center
    OpenGL renderer string: Mesa DRI Intel(R) Haswell Mobile 
    OpenGL core profile version string: 4.5 (Core Profile) Mesa 18.0.5
    OpenGL core profile shading language version string: 4.50
    OpenGL core profile context flags: (none)
    OpenGL core profile profile mask: core profile
    OpenGL core profile extensions:
    OpenGL version string: 3.0 Mesa 18.0.5
    OpenGL shading language version string: 1.30
    OpenGL context flags: (none)
    OpenGL extensions:
    OpenGL ES profile version string: OpenGL ES 3.1 Mesa 18.0.5
    OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10

 uname -a
Linux boss429 4.18.10-200.fc28.x86_64 #1 SMP Wed Sep 26 09:48:36 UTC 2018 x86_64 x86_64 x86_64 GNU ...
edit retag flag offensive close merge delete



Hi, update your question with output of inxi -SMGxxxz.

PS Apple's dream come true: need more ram? Buy newer macbook ;/

ozeszty gravatar imageozeszty ( 2018-10-11 13:59:13 -0500 )edit

I updated it - thanks for the quick reply.

wirehead gravatar imagewirehead ( 2018-10-11 17:06:21 -0500 )edit

Does it also happen without external monitor?

You can try x.Org session instead of wayland (use a gear icon on login screen).

There's an updated firmware for MBP114, but you probably need OS X and App Store for that.

Try booting Fedora 29 beta from a live USB. It has many newer packages with lots of fixes, e.g. mesa (open source GPU driver you're using), Gnome, Wayland etc.

ozeszty gravatar imageozeszty ( 2018-10-12 13:23:56 -0500 )edit

It does happen without an external monitor.

When I was using instead of Wayland, it definitely ran more smoothly, but I had other issues that were more painful to deal with than a slow desktop, so I think going back to X is a non-starter.

I will give Fedora 29 a shot, probably this weekend - although since it's expected to release at the end of the month perhaps I'll just wait until then and upgrade.

Thanks for the suggestions, everyone. I'll report back if I unearth a fix or more evidence of what the source of the trouble might be.

wirehead gravatar imagewirehead ( 2018-10-16 13:54:26 -0500 )edit

3 Answers

Sort by ยป oldest newest most voted

answered 2018-10-11 19:01:20 -0500

swilson gravatar image

Try checking the CPU speed with

cat /proc/cpuinfo | grep -i mhz

make sure that the CPUs are running at the correct speed or close to the correct speed. One thing I have seen is that the the processor governor sometimes gets stuck at a low speed when doing CPU scaling. I have fixed this in the past with the following:

- Install kernel-tools.
- nano /etc/sysconfig/cpupower and set both both options to performance.
- To set immediately ran ' cpupower frequency-set -g performance'

I also have had to use the kernel parameter processor.ignore_ppc=1 at boot before to allow the processor to properly scale ondemand and mange fan spinup. My issue centered around a Dell laptop and a third party power cord.


edit flag offensive delete link more

answered 2018-10-18 13:02:24 -0500

wirehead gravatar image

Well, I got impatient and went ahead and performed the upgrade to FC29 - and it appears my issue is solved. I've actually been dealing with this since sometime around FC25 and only now got irritated enough to seek help sorting it out - awfully convenient that it appears to be fixed in the most recent release without my having done anything.

Sometimes laziness does pay.

edit flag offensive delete link more


Definitely up to you to decide whether it was worth waiting for two years instead of reporting it and possibly getting a fix earlier. Anyway, have fun with new and super-smooth Fedora ;)

ozeszty gravatar imageozeszty ( 2018-10-22 10:15:19 -0500 )edit

Your Answer

Please start posting anonymously - your entry will be published after you log in or create a new account.

Add Answer

Question Tools

1 follower


Asked: 2018-10-11 12:59:55 -0500

Seen: 142 times

Last updated: Oct 18 '18