English
Ask Your Question

Revision history [back]

click to hide/show revision 1
initial version

How to add a custom resolution to Weyland Fedora 25?

I usually use the commands below in linux to add a custom resoltion so my nuc 4k@60hz DP to hdmi adptor will give me full 60hz glory but cant get it working in fedora 25, any help would be appreciated. Code-- xrandr --newmode "3840x216059.95" 533.6 3840 3982 4027 4064 2160 2170 2180 2190 +hsync +vsync xrandr --addmode DP1 "3840x216059.95" xrandr --output DP1 --mode "3840x2160_59.95" Code--

Here are the results of my attempt to get this working in Fedora 25

xrandr: cannot find output "DP1" warning: output DP1 not found; ignoring [mike@localhost ~]$ xrandr Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 8192 x 8192 XWAYLAND0 connected 3840x2160+0+0 950mm x 540mm 3840x2160 29.96*+ 3840x216059.95 (0x27c) 533.600MHz +HSync +VSync h: width 3840 start 3982 end 4027 total 4064 skew 0 clock 131.30KHz v: height 2160 start 2170 end 2180 total 2190 clock 59.95Hz [mike@localhost ~]$ xrandr --output XWAYLAND0 --mode "3840x216059.95" xrandr: cannot find mode 3840x216059.95 [mike@localhost ~]$ xrandr --addmode XWAYLAND0 "3840x216059.95" [mike@localhost ~]$ xrandr --output XWAYLAND0 --mode "3840x216059.95" xrandr: Configure crtc 0 failed [mike@localhost ~]$ xrandr --verbose Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 8192 x 8192 XWAYLAND0 connected (normal) Identifier: 0x21 Timestamp: 470836 Subpixel: unknown Clones:
CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 3840x2160 (0x22) 338.500MHz -HSync +VSync +preferred h: width 3840 start 4080 end 4488 total 5136 skew 0 clock 65.91KHz v: height 2160 start 2163 end 2168 total 2200 clock 29.96Hz 3840x2160
59.95 (0x27c) 533.600MHz +HSync +VSync h: width 3840 start 3982 end 4027 total 4064 skew 0 clock 131.30KHz v: height 2160 start 2170 end 2180 total 2190 clock 59.95Hz [mike@localhost ~]$ xrandr --crtc XWAYLAND0 --output XWAYLAND0 --mode "3840x216059.95" xrandr: --crtc must be used after --output Try 'xrandr --help' for more information. [mike@localhost ~]$ xrandr --output XWAYLAND0 --crtc XWAYLAND0 --mode "3840x216059.95" xrandr: invalid name 'XWAYLAND0' Try 'xrandr --help' for more information. [mike@localhost ~]$ xrandr --output XWAYLAND0 --crtc CRT0 --mode "3840x216059.95" xrandr: invalid name 'CRT0' Try 'xrandr --help' for more information. [mike@localhost ~]$ xrandr --output XWAYLAND0 --crtc CRT1 --mode "3840x216059.95" xrandr: invalid name 'CRT1' [mike@localhost ~]$ xrandr --output XWAYLAND0 --mode "3840x2160_59.95" xrandr: Configure crtc 0 failed

click to hide/show revision 2
No.2 Revision

How to add a custom resolution to Weyland Fedora 25?

I usually use the commands below in linux to add a custom resoltion so my nuc 4k@60hz DP to hdmi adptor will give me full 60hz glory but cant get it working in fedora 25, any help would be appreciated. Code-- appreciated.

xrandr --newmode "3840x216059.95" "3840x2160_59.95" 533.6 3840 3982 4027 4064 2160 2170 2180 2190 +hsync +vsync
xrandr --addmode DP1 "3840x216059.95"
"3840x2160_59.95"
xrandr --output DP1 --mode "3840x2160_59.95"
Code--

Here are the results of my attempt to get this working in Fedora 25

xrandr: cannot find output "DP1"
warning: output DP1 not found; ignoring
[mike@localhost ~]$ xrandr
Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 8192 x 8192
XWAYLAND0 connected 3840x2160+0+0 950mm x 540mm
   3840x2160     29.96*+
  3840x216059.95 3840x2160_59.95 (0x27c) 533.600MHz +HSync +VSync
        h: width  3840 start 3982 end 4027 total 4064 skew    0 clock 131.30KHz
        v: height 2160 start 2170 end 2180 total 2190           clock  59.95Hz
[mike@localhost ~]$ xrandr --output XWAYLAND0 --mode "3840x216059.95"
"3840x2160_59.95"
xrandr: cannot find mode 3840x216059.95
3840x2160_59.95
[mike@localhost ~]$ xrandr --addmode XWAYLAND0 "3840x216059.95"
[mike@localhost ~]$ xrandr --output XWAYLAND0 --mode "3840x216059.95"
"3840x2160_59.95"
[mike@localhost ~]$ xrandr --output XWAYLAND0 --mode "3840x2160_59.95"
xrandr: Configure crtc 0 failed
[mike@localhost ~]$ xrandr --verbose
Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 8192 x 8192
XWAYLAND0 connected (normal)
    Identifier: 0x21
    Timestamp:  470836
    Subpixel:   unknown
    Clones: 
CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 3840x2160 (0x22) 338.500MHz -HSync +VSync +preferred h: width 3840 start 4080 end 4488 total 5136 skew 0 clock 65.91KHz v: height 2160 start 2163 end 2168 total 2200 clock 29.96Hz 3840x2160
59.95 3840x2160_59.95 (0x27c) 533.600MHz +HSync +VSync h: width 3840 start 3982 end 4027 total 4064 skew 0 clock 131.30KHz v: height 2160 start 2170 end 2180 total 2190 clock 59.95Hz [mike@localhost ~]$ xrandr --crtc XWAYLAND0 --output XWAYLAND0 --mode "3840x216059.95" "3840x2160_59.95" xrandr: --crtc must be used after --output Try 'xrandr --help' for more information. [mike@localhost ~]$ xrandr --output XWAYLAND0 --crtc XWAYLAND0 --mode "3840x216059.95" "3840x2160_59.95" xrandr: invalid name 'XWAYLAND0' Try 'xrandr --help' for more information. [mike@localhost ~]$ xrandr --output XWAYLAND0 --crtc CRT0 --mode "3840x216059.95" "3840x2160_59.95" xrandr: invalid name 'CRT0' Try 'xrandr --help' for more information. [mike@localhost ~]$ xrandr --output XWAYLAND0 --crtc CRT1 --mode "3840x216059.95" "3840x2160_59.95" xrandr: invalid name 'CRT1' [mike@localhost ~]$ xrandr --output XWAYLAND0 --mode "3840x2160_59.95" xrandr: Configure crtc 0 failed

failed