Dopo installazione di F29, F30, F31, F32 partendo da zero non riesco a vedere il disco raid di Areca

Ho provato ad installare F28 e riesco a vedere il disco raid. Ho provato l’upgrade da 28 a 29 e non vedo piu` il disco. Qualcuno ha avuto un problema simile?
Scheda madre Asus X99-Deluxe, i7-5930K, 32GB, Disco di boot M.2 512MB, Controller raid Areca 1203-8i con 4 Hdd 1TB Seagate.

Anche con una live di Fedora 32 non lo vedi, ho capito bene?

Esatto. Con “lspci” il controller viene riconosciuto. Con “lshw” vedo il controller ma non riesco a vedere il disco creato.

Potresti lanciare questo comando?
lspci -k
e copiare qui l’output relativo alla scheda RAID?

02:00.0 RAID bus controller: Areca Technology Corp. ARC-1203 2/4/8 Port PCIe 2.0 to SATA 6Gb RAID Controller (rev 04)
Subsystem: Areca Technology Corp. ARC-1203 2/4/8 Port PCIe 2.0 to SATA 6Gb RAID Controller
Kernel driver in use: arcmsr
Kernel modules: arcmsr

E niente, il driver relativo alla scheda lo carica.

Hai mica guardato cosa dice dmesg, se vedi errori, avvisi o messaggi relativi a questa scheda?

[ 177.726550] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 177.726552] arcmsr: scsi bus reset eh returns with success
[ 188.075426] arcmsr12: abort device command of scsi id = 1 lun = 0
[ 190.801621] arcmsr: executing bus reset eh…num_resets = 2, num_aborts = 3
[ 214.854556] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 214.854565] arcmsr12: executing hw bus reset …
[ 252.438122] arcmsr12: cannot set driver mode
[ 276.431771] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 300.496797] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 300.496801] arcmsr: scsi bus reset eh returns with success
[ 310.903408] scsi 12:0:1:0: Device offlined - not ready after error recovery
[ 324.598503] Bluetooth: RFCOMM TTY layer initialized
[ 324.598509] Bluetooth: RFCOMM socket layer initialized
[ 324.598545] Bluetooth: RFCOMM ver 1.11
[ 327.418927] rfkill: input handler disabled
[ 331.944031] arcmsr12: abort device command of scsi id = 2 lun = 0
[ 334.691952] arcmsr: executing bus reset eh…num_resets = 3, num_aborts = 4
[ 358.723474] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 358.723482] arcmsr12: executing hw bus reset …
[ 395.894071] arcmsr12: cannot set driver mode
[ 419.711338] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 443.525405] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 443.525407] arcmsr: scsi bus reset eh returns with success
[ 453.896277] arcmsr12: abort device command of scsi id = 2 lun = 0
[ 456.622470] arcmsr: executing bus reset eh…num_resets = 4, num_aborts = 5
[ 480.618987] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 480.618995] arcmsr12: executing hw bus reset …
[ 517.850967] arcmsr12: cannot set driver mode
[ 541.912212] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 566.141564] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 566.141566] arcmsr: scsi bus reset eh returns with success
[ 576.617537] scsi 12:0:2:0: Device offlined - not ready after error recovery
[ 597.614273] arcmsr12: abort device command of scsi id = 3 lun = 0
[ 600.346431] arcmsr: executing bus reset eh…num_resets = 5, num_aborts = 6
[ 624.231516] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 624.231526] arcmsr12: executing hw bus reset …
[ 661.288593] arcmsr12: cannot set driver mode
[ 685.285592] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 709.305299] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 709.305301] arcmsr: scsi bus reset eh returns with success
[ 719.693303] arcmsr12: abort device command of scsi id = 3 lun = 0
[ 722.420054] arcmsr: executing bus reset eh…num_resets = 6, num_aborts = 7
[ 746.497630] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 746.497639] arcmsr12: executing hw bus reset …
[ 783.898774] arcmsr12: cannot set driver mode
[ 807.914715] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 831.973010] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 831.973012] arcmsr: scsi bus reset eh returns with success
[ 842.368819] scsi 12:0:3:0: Device offlined - not ready after error recovery
[ 863.381072] arcmsr12: abort device command of scsi id = 4 lun = 0
[ 866.097359] arcmsr: executing bus reset eh…num_resets = 7, num_aborts = 8
[ 889.951120] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 889.951131] arcmsr12: executing hw bus reset …
[ 927.034440] arcmsr12: cannot set driver mode
[ 951.082057] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 975.151719] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 975.151722] arcmsr: scsi bus reset eh returns with success
[ 985.560346] arcmsr12: abort device command of scsi id = 4 lun = 0
[ 988.292735] arcmsr: executing bus reset eh…num_resets = 8, num_aborts = 9
[ 1012.238308] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 1012.238316] arcmsr12: executing hw bus reset …
[ 1049.378570] arcmsr12: cannot set driver mode
[ 1073.351446] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 1097.353412] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 1097.353415] arcmsr: scsi bus reset eh returns with success
[ 1107.731275] scsi 12:0:4:0: Device offlined - not ready after error recovery
[ 1128.725668] arcmsr12: abort device command of scsi id = 5 lun = 0
[ 1131.458686] arcmsr: executing bus reset eh…num_resets = 9, num_aborts = 10
[ 1155.458898] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 1155.458908] arcmsr12: executing hw bus reset …
[ 1192.673226] arcmsr12: cannot set driver mode
[ 1216.673436] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 1240.695646] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 1240.695649] arcmsr: scsi bus reset eh returns with success
[ 1251.089066] arcmsr12: abort device command of scsi id = 5 lun = 0
[ 1253.818920] arcmsr: executing bus reset eh…num_resets = 10, num_aborts = 11
[ 1277.844252] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 1277.844261] arcmsr12: executing hw bus reset …
[ 1315.113509] arcmsr12: cannot set driver mode
[ 1339.138821] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 1363.186154] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 1363.186156] arcmsr: scsi bus reset eh returns with success
[ 1373.585127] scsi 12:0:5:0: Device offlined - not ready after error recovery
[ 1394.593642] arcmsr12: abort device command of scsi id = 6 lun = 0
[ 1397.327103] arcmsr: executing bus reset eh…num_resets = 11, num_aborts = 12
[ 1421.331099] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 1421.331108] arcmsr12: executing hw bus reset …
[ 1458.552339] arcmsr12: cannot set driver mode
[ 1482.556365] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 1506.580441] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 1506.580444] arcmsr: scsi bus reset eh returns with success
[ 1516.956697] arcmsr12: abort device command of scsi id = 6 lun = 0
[ 1519.680659] arcmsr: executing bus reset eh…num_resets = 12, num_aborts = 13
[ 1543.653548] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 1543.653558] arcmsr12: executing hw bus reset …
[ 1580.841518] arcmsr12: cannot set driver mode
[ 1604.814426] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 1628.809308] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 1628.809311] arcmsr: scsi bus reset eh returns with success
[ 1639.189508] scsi 12:0:6:0: Device offlined - not ready after error recovery
[ 1660.187544] arcmsr12: abort device command of scsi id = 7 lun = 0
[ 1662.919770] arcmsr: executing bus reset eh…num_resets = 13, num_aborts = 14
[ 1686.912918] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 1686.912928] arcmsr12: executing hw bus reset …
[ 1724.115342] arcmsr12: cannot set driver mode
[ 1748.108520] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 1772.111428] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 1772.111431] arcmsr: scsi bus reset eh returns with success
[ 1782.484634] arcmsr12: abort device command of scsi id = 7 lun = 0
[ 1785.207282] arcmsr: executing bus reset eh…num_resets = 14, num_aborts = 15
[ 1809.168510] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 1809.168520] arcmsr12: executing hw bus reset …
[ 1846.337413] arcmsr12: cannot set driver mode
[ 1870.298668] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 1894.281888] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 1894.281891] arcmsr: scsi bus reset eh returns with success
[ 1904.654058] scsi 12:0:7:0: Device offlined - not ready after error recovery
[ 1925.642557] arcmsr12: abort device command of scsi id = 8 lun = 0
[ 1928.374427] arcmsr: executing bus reset eh…num_resets = 15, num_aborts = 16
[ 1952.364501] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 1952.364510] arcmsr12: executing hw bus reset …
[ 1989.563149] arcmsr12: cannot set driver mode
[ 2013.553247] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 2037.567667] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 2037.567670] arcmsr: scsi bus reset eh returns with success
[ 2047.954082] arcmsr12: abort device command of scsi id = 8 lun = 0
[ 2050.680419] arcmsr: executing bus reset eh…num_resets = 16, num_aborts = 17
[ 2074.674463] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 2074.674473] arcmsr12: executing hw bus reset …
[ 2111.895230] arcmsr12: cannot set driver mode
[ 2135.889276] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 2159.905316] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 2159.905319] arcmsr: scsi bus reset eh returns with success
[ 2170.290904] scsi 12:0:8:0: Device offlined - not ready after error recovery
[ 2191.288558] arcmsr12: abort device command of scsi id = 9 lun = 0
[ 2194.020882] arcmsr: executing bus reset eh…num_resets = 17, num_aborts = 18
[ 2218.014899] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 2218.014908] arcmsr12: executing hw bus reset …
[ 2255.219671] arcmsr12: cannot set driver mode
[ 2279.213716] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 2303.225914] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 2303.225917] arcmsr: scsi bus reset eh returns with success
[ 2313.610362] arcmsr12: abort device command of scsi id = 9 lun = 0
[ 2316.336188] arcmsr: executing bus reset eh…num_resets = 18, num_aborts = 19
[ 2340.325686] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 2340.325695] arcmsr12: executing hw bus reset …
[ 2377.539411] arcmsr12: cannot set driver mode
[ 2401.528919] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 2425.540415] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 2425.540417] arcmsr: scsi bus reset eh returns with success
[ 2435.923903] scsi 12:0:9:0: Device offlined - not ready after error recovery
[ 2456.917696] arcmsr12: abort device command of scsi id = 10 lun = 0
[ 2459.649488] arcmsr: executing bus reset eh…num_resets = 19, num_aborts = 20
[ 2483.639009] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 2483.639018] arcmsr12: executing hw bus reset …
[ 2520.836739] arcmsr12: cannot set driver mode
[ 2544.826828] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 2568.840795] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 2568.840798] arcmsr: scsi bus reset eh returns with success
[ 2579.226314] arcmsr12: abort device command of scsi id = 10 lun = 0
[ 2581.952420] arcmsr: executing bus reset eh…num_resets = 20, num_aborts = 21
[ 2605.944390] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 2605.944399] arcmsr12: executing hw bus reset …
[ 2643.161946] arcmsr12: cannot set driver mode
[ 2667.153922] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 2691.167889] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 2691.167891] arcmsr: scsi bus reset eh returns with success
[ 2701.552462] scsi 12:0:10:0: Device offlined - not ready after error recovery
[ 2722.548393] arcmsr12: abort device command of scsi id = 11 lun = 0
[ 2725.280475] arcmsr: executing bus reset eh…num_resets = 21, num_aborts = 22
[ 2749.272459] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 2749.272467] arcmsr12: executing hw bus reset …
[ 2786.474020] arcmsr12: cannot set driver mode
[ 2810.472030] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 2834.495505] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 2834.495508] arcmsr: scsi bus reset eh returns with success
[ 2844.885136] arcmsr12: abort device command of scsi id = 11 lun = 0
[ 2847.612312] arcmsr: executing bus reset eh…num_resets = 22, num_aborts = 23
[ 2871.613782] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 2871.613791] arcmsr12: executing hw bus reset …
[ 2908.846066] arcmsr12: cannot set driver mode
[ 2932.847539] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 2956.871013] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 2956.871015] arcmsr: scsi bus reset eh returns with success
[ 2967.259633] scsi 12:0:11:0: Device offlined - not ready after error recovery
[ 2988.263968] arcmsr12: abort device command of scsi id = 12 lun = 0
[ 2990.997115] arcmsr: executing bus reset eh…num_resets = 23, num_aborts = 24
[ 3014.998581] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 3014.998590] arcmsr12: executing hw bus reset …
[ 3052.220865] arcmsr12: cannot set driver mode
[ 3076.223337] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 3100.246810] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 3100.246812] arcmsr: scsi bus reset eh returns with success
[ 3110.629404] arcmsr12: abort device command of scsi id = 12 lun = 0
[ 3113.356616] arcmsr: executing bus reset eh…num_resets = 24, num_aborts = 25
[ 3137.358086] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 3137.358094] arcmsr12: executing hw bus reset …
[ 3174.575682] arcmsr12: cannot set driver mode
[ 3198.567597] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 3222.581503] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 3222.581505] arcmsr: scsi bus reset eh returns with success
[ 3232.966265] scsi 12:0:12:0: Device offlined - not ready after error recovery
[ 3253.961957] arcmsr12: abort device command of scsi id = 13 lun = 0
[ 3256.694035] arcmsr: executing bus reset eh…num_resets = 25, num_aborts = 26
[ 3280.686924] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 3280.686934] arcmsr12: executing hw bus reset …
[ 3317.886451] arcmsr12: cannot set driver mode
[ 3341.875284] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 3365.893098] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 3365.893101] arcmsr: scsi bus reset eh returns with success
[ 3376.270259] arcmsr12: abort device command of scsi id = 13 lun = 0
[ 3378.996009] arcmsr: executing bus reset eh…num_resets = 26, num_aborts = 27
[ 3402.984835] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 3402.984845] arcmsr12: executing hw bus reset …
[ 3440.197511] arcmsr12: cannot set driver mode
[ 3464.186343] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 3488.197164] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 3488.197167] arcmsr: scsi bus reset eh returns with success
[ 3498.580419] scsi 12:0:13:0: Device offlined - not ready after error recovery
[ 3519.574561] arcmsr12: abort device command of scsi id = 14 lun = 0
[ 3522.306277] arcmsr: executing bus reset eh…num_resets = 27, num_aborts = 28
[ 3546.295119] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 3546.295129] arcmsr12: executing hw bus reset …
[ 3583.490804] arcmsr12: cannot set driver mode
[ 3607.479604] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 3631.490425] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 3631.490427] arcmsr: scsi bus reset eh returns with success
[ 3641.874576] arcmsr12: abort device command of scsi id = 14 lun = 0
[ 3644.600363] arcmsr: executing bus reset eh…num_resets = 28, num_aborts = 29
[ 3668.589187] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 3668.589197] arcmsr12: executing hw bus reset …
[ 3705.801866] arcmsr12: cannot set driver mode
[ 3729.790699] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 3753.801519] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 3753.801521] arcmsr: scsi bus reset eh returns with success
[ 3764.185007] scsi 12:0:14:0: Device offlined - not ready after error recovery
[ 3785.177917] arcmsr12: abort device command of scsi id = 15 lun = 0
[ 3787.909631] arcmsr: executing bus reset eh…num_resets = 29, num_aborts = 30
[ 3811.898476] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 3811.898485] arcmsr12: executing hw bus reset …
[ 3849.092927] arcmsr12: cannot set driver mode
[ 3873.078205] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 3897.085465] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 3897.085468] arcmsr: scsi bus reset eh returns with success
[ 3907.467083] arcmsr12: abort device command of scsi id = 15 lun = 0
[ 3910.192416] arcmsr: executing bus reset eh…num_resets = 30, num_aborts = 31
[ 3934.177693] arcmsr12: wait ‘abort all outstanding command’ timeout
[ 3934.177701] arcmsr12: executing hw bus reset …
[ 3971.384847] arcmsr12: cannot set driver mode
[ 3995.370125] arcmsr12: wait ‘start adapter background rebuild’ timeout
[ 4019.377392] ARCMSR IOP enables EOI_MODE TIMEOUT
[ 4019.377394] arcmsr: scsi bus reset eh returns with success
[ 4029.759780] scsi 12:0:15:0: Device offlined - not ready after error recovery
[ 4029.760001] scsi 12:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0
[ 4029.761023] scsi 12:0:16:0: Attached scsi generic sg2 type 3

Scusami, ma qui mi arrendo… Non ho sufficienti competenze.

Grazie comunque. Provo ad esporlo sulle discussioni in inglese. Ancora grazie.

1 Like

Bo.
Dai un’occhiata anche qui: http://www.areca.us/support/s_linux/driver/fedora/
Il readme per F32 dice:

Fedora 32 kernel default driver has support Areca all Raid controllers. So just following the Fedora
   installation guide to install system to on-board hard drive or Areca Raid volume. In case of installation to
   Areca Raid volume, you should first create a Raid volume by reference to Areca Raid controllers user's manual.

Va bene che il mio inglese è carente, ma non ho ben capito cosa dica il readme :sweat_smile:

Ciao, avevo contattato anche Areca Taiwan per il problema ma non siamo riusciti a capire cosa sia. Il readme, che probabilmente e una traduzione dice il kernel di Fedora 32 contiene gia al suo interno il driver per supportare tutti i controller Areca e che in caso di installazione sul disco raid bisogna ovviamente creare prima di installare il disco raid. Sono gia` 3 settimane che cerco di risolvere il problema, ho parlato co Asus, Areca. Da quello che ho capito sembra che il problema si trovi tra il driver e il meccanismo di riconoscimento dei dischi di linux. Ho cercato informazioni sul meccanismo ma non ho trovato quello che cerco. Speriamo che qualcuno si incuriosisca e mi dia una mano. Grazie ancora.

Potresti provare anche a scrivere sulla mailing list https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org/
Magari lì ci sono più personaggi barbuti, di quelli che masticano il kernel a colazione. :sweat_smile: