Fedora 33 Update Failures

I’ve been having problem with updating my Fedora 33. Everytime I run the command for the updates, there are a lot of installation failures. If I try to load the newly updated kernel, it would not do anything, but trying to load the drives. I’ve done some troubleshooting, but I think the problem is caused by the installation failures.

kernel-core-5.8.18-300.fc33.x86_64 < The kernel that I had

kernel-core-5.10.12-200.fc33.x86_64 < The updated kernel

Here is the error message. To my knowledge, I haven’t done anything weird. I had similar problem with my Fedora 31, so because of that, I formatted my harddisk and installed Fedora 33. Unfortunately the problem seem to persisted. Any help would be appreciated. Thank you in advance.

dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/bin/bash'
dracut-install: ERROR: installing '/bin/bash'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /bin/bash
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/system-generators/systemd-debug-generator'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-coredump'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-cgroups-agent'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-shutdown'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-reply-password'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-fsck'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/../../bin/udevadm'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-journald'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-sysctl'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-modules-load'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-vconsole-setup'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-volatile-root'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/system-generators/systemd-fstab-generator'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/system-generators/systemd-gpt-auto-generator'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/journalctl'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/systemctl'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/echo'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/swapoff'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/kmod'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/../bin/kmod'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/../bin/kmod'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/../bin/kmod'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/../bin/kmod'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/../bin/kmod'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/../bin/kmod'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/mount'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/umount'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/../bin/systemctl'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/../bin/systemctl'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/systemd-run'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/systemd-escape'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/systemd-cgls'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/systemd-tmpfiles'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/systemd-ask-password'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/systemd-tty-ask-password-agent'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/nologin'
dracut-install: ERROR: installing 'nologin'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l nologin
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/true'
dracut-install: ERROR: installing 'true'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l true
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/udevadm'
dracut-install: ERROR: installing '/usr/bin/udevadm'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/bin/udevadm
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/loginctl'
dracut-install: ERROR: installing '/usr/bin/loginctl'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/bin/loginctl
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-vconsole-setup'
dracut-install: ERROR: installing '/usr/lib/systemd/systemd-vconsole-setup'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/systemd/systemd-vconsole-setup
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-sysctl'
dracut-install: ERROR: installing '/usr/lib/systemd/systemd-sysctl'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/systemd/systemd-sysctl
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/lib64/libfreeblpriv3.so'
dracut-install: ERROR: installing '/lib64/libfreeblpriv3.so'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/lib64/libfreebl3.so'
dracut-install: ERROR: installing '/lib64/libfreebl3.so'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib64/libfreeblpriv3.so'
dracut-install: ERROR: installing '/usr/lib64/libfreeblpriv3.so'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib64/libfreebl3.so'
dracut-install: ERROR: installing '/usr/lib64/libfreebl3.so'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /lib64/libfreeblpriv3.so /lib64/libfreeblpriv3.chk /lib64/libfreebl3.so /usr/lib64/libfreeblpriv3.so /usr/lib64/libfreeblpriv3.chk /usr/lib64/libfreebl3.so
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/rngd'
dracut-install: ERROR: installing 'rngd'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l rngd
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/lib64/opensc-pkcs11.so'
dracut-install: ERROR: installing '/lib64/opensc-pkcs11.so'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib64/opensc-pkcs11.so'
dracut-install: ERROR: installing '/usr/lib64/opensc-pkcs11.so'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /lib64/opensc-pkcs11.so /usr/lib64/opensc-pkcs11.so
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/setfont'
dracut-install: ERROR: installing 'setfont'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/loadkeys'
dracut-install: ERROR: installing 'loadkeys'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/kbd_mode'
dracut-install: ERROR: installing 'kbd_mode'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/stty'
dracut-install: ERROR: installing 'stty'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l setfont loadkeys kbd_mode stty
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/gzip'
dracut-install: ERROR: installing 'gzip'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l gzip
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/ip'
dracut-install: ERROR: installing 'ip'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/sed'
dracut-install: ERROR: installing 'sed'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/grep'
dracut-install: ERROR: installing 'grep'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l ip sed grep
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/NetworkManager'
dracut-install: ERROR: installing 'NetworkManager'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l NetworkManager
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/libexec/nm-initrd-generator'
dracut-install: ERROR: installing '/usr/libexec/nm-initrd-generator'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/libexec/nm-initrd-generator
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/teamd'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/dhclient'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/lib64/NetworkManager/1.26.4-1.fc33/libnm-device-plugin-team.so'
dracut-install: ERROR: installing '/lib64/NetworkManager/1.26.4-1.fc33/libnm-device-plugin-team.so'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib64/NetworkManager/1.26.4-1.fc33/libnm-device-plugin-team.so'
dracut-install: ERROR: installing '/usr/lib64/NetworkManager/1.26.4-1.fc33/libnm-device-plugin-team.so'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /lib64/NetworkManager/1.26.4-1.fc33/libnm-device-plugin-team.so /usr/lib64/NetworkManager/1.26.4-1.fc33/libnm-device-plugin-team.so
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/libexec/nm-dhcp-helper'
dracut-install: ERROR: installing '/usr/libexec/nm-dhcp-helper'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/libexec/nm-dhcp-helper
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/lib64/NetworkManager/1.26.4-1.fc33/libnm-settings-plugin-ifcfg-rh.so'
dracut-install: ERROR: installing '/lib64/NetworkManager/1.26.4-1.fc33/libnm-settings-plugin-ifcfg-rh.so'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib64/NetworkManager/1.26.4-1.fc33/libnm-settings-plugin-ifcfg-rh.so'
dracut-install: ERROR: installing '/usr/lib64/NetworkManager/1.26.4-1.fc33/libnm-settings-plugin-ifcfg-rh.so'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /lib64/NetworkManager/1.26.4-1.fc33/libnm-settings-plugin-ifcfg-rh.so /usr/lib64/NetworkManager/1.26.4-1.fc33/libnm-settings-plugin-ifcfg-rh.so
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/lib64/libnss_dns-2.32.so'
dracut-install: ERROR: installing '/lib64/libnss_dns.so.2'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/lib64/libnss_mdns4_minimal.so.2'
dracut-install: ERROR: installing '/lib64/libnss_mdns4_minimal.so.2'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib64/libnss_dns-2.32.so'
dracut-install: ERROR: installing '/usr/lib64/libnss_dns.so.2'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib64/libnss_mdns4_minimal.so.2'
dracut-install: ERROR: installing '/usr/lib64/libnss_mdns4_minimal.so.2'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /lib64/libnss_dns.so.2 /lib64/libnss_mdns4_minimal.so.2 /usr/lib64/libnss_dns.so.2 /usr/lib64/libnss_mdns4_minimal.so.2
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/sh'
dracut-install: ERROR: failed to install '/usr/bin/sh'
dracut-install: ERROR: installing '/usr/lib/dracut/modules.d/40network/netroot.sh' to '/sbin/netroot'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/dracut/modules.d/40network/netroot.sh /sbin/netroot
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/gawk'
dracut-install: ERROR: installing 'awk'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l awk
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/readlink'
dracut-install: ERROR: installing 'readlink'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l readlink
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/udevadm'
dracut-install: ERROR: installing '/usr/bin/udevadm'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/bin/udevadm
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/btrfs'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/sh'
dracut-install: ERROR: failed to install '/usr/bin/sh'
dracut-install: ERROR: installing '/usr/lib/dracut/modules.d/90crypt/crypt-run-generator.sh' to '/sbin/crypt-run-generator'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/dracut/modules.d/90crypt/crypt-run-generator.sh /sbin/crypt-run-generator
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/system-generators/systemd-cryptsetup-generator'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/systemd-cryptsetup'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/systemd-ask-password'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/systemd-tty-ask-password-agent'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/dmsetup'
dracut-install: ERROR: installing 'dmsetup'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l dmsetup
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/dmeventd'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/lib64/libdevmapper-event.so.1.02'
dracut-install: ERROR: installing '/lib64/libdevmapper-event.so.1.02'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib64/libdevmapper-event.so.1.02'
dracut-install: ERROR: installing '/usr/lib64/libdevmapper-event.so.1.02'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /lib64/libdevmapper-event.so.1.02 /usr/lib64/libdevmapper-event.so.1.02
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/dmsetup'
dracut-install: ERROR: installing '/usr/sbin/dmsetup'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /usr/sbin/dmsetup
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/dmsetup'
dracut-install: ERROR: installing '/usr/sbin/dmsetup'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /usr/sbin/dmsetup
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/dmsetup'
dracut-install: ERROR: installing '/usr/sbin/dmsetup'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /usr/sbin/dmsetup
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/dmsetup'
dracut-install: ERROR: installing '/usr/sbin/dmsetup'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/sbin/dmsetup
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/sbin/dmsetup'
dracut-install: ERROR: installing '/sbin/dmsetup'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /sbin/dmsetup
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/umount'
dracut-install: ERROR: installing 'umount'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l umount
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/tr'
dracut-install: ERROR: installing 'tr'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l tr
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/../bin/udevadm'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/udevadm'
dracut-install: ERROR: installing 'udevadm'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/cat'
dracut-install: ERROR: installing 'cat'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/uname'
dracut-install: ERROR: installing 'uname'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/sbin/blkid'
dracut-install: ERROR: installing 'blkid'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l udevadm cat uname blkid
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/systemd/../../bin/udevadm'
dracut-install: ERROR: installing '/usr/lib/systemd/systemd-udevd'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/systemd/systemd-udevd
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/udev/ata_id'
dracut-install: ERROR: installing '/usr/lib/udev/ata_id'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /usr/lib/udev/ata_id
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/udev/ata_id'
dracut-install: ERROR: installing '/usr/lib/udev/ata_id'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /usr/lib/udev/ata_id
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/udev/ata_id'
dracut-install: ERROR: installing '/usr/lib/udev/ata_id'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /usr/lib/udev/ata_id
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/udev/scsi_id'
dracut-install: ERROR: installing '/usr/lib/udev/scsi_id'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /usr/lib/udev/scsi_id
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/udev/scsi_id'
dracut-install: ERROR: installing '/usr/lib/udev/scsi_id'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /usr/lib/udev/scsi_id
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/udevadm'
dracut-install: ERROR: installing '/usr/bin/udevadm'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/bin/udevadm
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/loginctl'
dracut-install: ERROR: installing '/usr/bin/loginctl'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/bin/loginctl
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/udev/ata_id'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/udev/cdrom_id'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib/udev/scsi_id'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/lib64/libnss_files-2.32.so'
dracut-install: ERROR: installing '/lib64/libnss_files-2.32.so'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/lib64/libnss_files-2.32.so'
dracut-install: ERROR: installing '/lib64/libnss_files.so.2'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib64/libnss_files-2.32.so'
dracut-install: ERROR: installing '/usr/lib64/libnss_files-2.32.so'
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/lib64/libnss_files-2.32.so'
dracut-install: ERROR: installing '/usr/lib64/libnss_files.so.2'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -a -l /lib64/libnss_files-2.32.so /lib64/libnss_files.so.2 /usr/lib64/libnss_files-2.32.so /usr/lib64/libnss_files.so.2
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/sh'
dracut-install: ERROR: failed to install '/usr/bin/sh'
dracut-install: ERROR: installing '/usr/lib/dracut/modules.d/98dracut-systemd/dracut-emergency.sh' to '/bin/dracut-emergency'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/dracut/modules.d/98dracut-systemd/dracut-emergency.sh /bin/dracut-emergency
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/sh'
dracut-install: ERROR: failed to install '/usr/bin/sh'
dracut-install: ERROR: installing '/usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.sh' to '/bin/dracut-cmdline'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.sh /bin/dracut-cmdline
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/bash'
dracut-install: ERROR: failed to install '/usr/bin/bash'
dracut-install: ERROR: installing '/usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline-ask.sh' to '/bin/dracut-cmdline-ask'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline-ask.sh /bin/dracut-cmdline-ask
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/sh'
dracut-install: ERROR: failed to install '/usr/bin/sh'
dracut-install: ERROR: installing '/usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.sh' to '/bin/dracut-pre-udev'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.sh /bin/dracut-pre-udev
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/sh'
dracut-install: ERROR: failed to install '/usr/bin/sh'
dracut-install: ERROR: installing '/usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.sh' to '/bin/dracut-pre-trigger'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.sh /bin/dracut-pre-trigger
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/sh'
dracut-install: ERROR: failed to install '/usr/bin/sh'
dracut-install: ERROR: installing '/usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.sh' to '/bin/dracut-initqueue'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.sh /bin/dracut-initqueue
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/sh'
dracut-install: ERROR: failed to install '/usr/bin/sh'
dracut-install: ERROR: installing '/usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.sh' to '/bin/dracut-pre-mount'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.x349gq/initramfs -l /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.sh /bin/dracut-pre-mount
dracut-install: ERROR: failed to install '/lib/$LIB/liblsp.so' for '/usr/bin/sh'

Did you use the automatic partitioning scheme or a custom one? If a custom one, anything of note?

Are you seeing other errors (like drive errors?) in the logs?

The fact that you’re seeing the same thing across both F31 and a clean install of F33 suggests a hardware problem, or something else unique to your system.

Yes, I used the automatic partitioning when setting up the Fedora.

Currently I’m not seeing any other error, but on the other time when I also did the update, I got an error when I was trying to decrypt the drive. I start to have a suspicion that the drive encryption might be the cause of the errors.

What happens if you run

 dracut -f --debug /boot/initramfs-5.10.12-200.fc33.x86_64.img 5.10.12-200.fc33.x86_64

?

This is what I got:

/usr/bin/dracut@688(): [[ -n '' ]]
/usr/bin/dracut@694(): [[ -n '' ]]
/usr/bin/dracut@694(): dracutbasedir=/usr/lib/dracut
/usr/bin/dracut@697(): [[ ! -f '' ]]
/usr/bin/dracut@698(): [[ -n '' ]]
/usr/bin/dracut@701(): conffile=/etc/dracut.conf
/usr/bin/dracut@705(): [[ ! -d '' ]]
/usr/bin/dracut@706(): [[ -n '' ]]
/usr/bin/dracut@709(): confdir=/etc/dracut.conf.d
/usr/bin/dracut@714(): [[ -f /etc/dracut.conf ]]
/usr/bin/dracut@715(): check_conf_file /etc/dracut.conf
/usr/bin/dracut@284(check_conf_file): grep -H -e '^[^#]*[+]=\("[^ ]\|.*[^ ]"\)' /etc/dracut.conf
/usr/bin/dracut@716(): . /etc/dracut.conf
//usr/bin/dracut@720(): dropindirs_sort .conf /etc/dracut.conf.d /usr/lib/dracut/dracut.conf.d
//usr/bin/dracut@292(dropindirs_sort): local suffix=.conf
//usr/bin/dracut@292(dropindirs_sort): shift
//usr/bin/dracut@293(dropindirs_sort): local -a files
//usr/bin/dracut@294(dropindirs_sort): local f d
//usr/bin/dracut@296(dropindirs_sort): for d in "$@"
//usr/bin/dracut@302(dropindirs_sort): sort -Vu
//usr/bin/dracut@297(dropindirs_sort): for i in "$d/"*"$suffix"
//usr/bin/dracut@298(dropindirs_sort): [[ -e /etc/dracut.conf.d/*.conf ]]
//usr/bin/dracut@296(dropindirs_sort): for d in "$@"
//usr/bin/dracut@297(dropindirs_sort): for i in "$d/"*"$suffix"
//usr/bin/dracut@298(dropindirs_sort): [[ -e /usr/lib/dracut/dracut.conf.d/01-dist.conf ]]
//usr/bin/dracut@299(dropindirs_sort): printf '%s\n' 01-dist.conf
//usr/bin/dracut@297(dropindirs_sort): for i in "$d/"*"$suffix"
//usr/bin/dracut@298(dropindirs_sort): [[ -e /usr/lib/dracut/dracut.conf.d/02-rescue.conf ]]
//usr/bin/dracut@299(dropindirs_sort): printf '%s\n' 02-rescue.conf
//usr/bin/dracut@297(dropindirs_sort): for i in "$d/"*"$suffix"
//usr/bin/dracut@298(dropindirs_sort): [[ -e /usr/lib/dracut/dracut.conf.d/50-nss-softokn.conf ]]
//usr/bin/dracut@303(dropindirs_sort): readarray -t files
//usr/bin/dracut@299(dropindirs_sort): printf '%s\n' 50-nss-softokn.conf
//usr/bin/dracut@305(dropindirs_sort): for f in "${files[@]}"
//usr/bin/dracut@306(dropindirs_sort): for d in "$@"
//usr/bin/dracut@307(dropindirs_sort): [[ -e /etc/dracut.conf.d/01-dist.conf ]]
//usr/bin/dracut@306(dropindirs_sort): for d in "$@"
//usr/bin/dracut@307(dropindirs_sort): [[ -e /usr/lib/dracut/dracut.conf.d/01-dist.conf ]]
//usr/bin/dracut@308(dropindirs_sort): printf '%s\n' /usr/lib/dracut/dracut.conf.d/01-dist.conf
//usr/bin/dracut@309(dropindirs_sort): continue 2
//usr/bin/dracut@305(dropindirs_sort): for f in "${files[@]}"
//usr/bin/dracut@306(dropindirs_sort): for d in "$@"
//usr/bin/dracut@307(dropindirs_sort): [[ -e /etc/dracut.conf.d/02-rescue.conf ]]
//usr/bin/dracut@306(dropindirs_sort): for d in "$@"
//usr/bin/dracut@307(dropindirs_sort): [[ -e /usr/lib/dracut/dracut.conf.d/02-rescue.conf ]]
//usr/bin/dracut@308(dropindirs_sort): printf '%s\n' /usr/lib/dracut/dracut.conf.d/02-rescue.conf
//usr/bin/dracut@309(dropindirs_sort): continue 2
//usr/bin/dracut@305(dropindirs_sort): for f in "${files[@]}"
//usr/bin/dracut@306(dropindirs_sort): for d in "$@"
//usr/bin/dracut@307(dropindirs_sort): [[ -e /etc/dracut.conf.d/50-nss-softokn.conf ]]
//usr/bin/dracut@306(dropindirs_sort): for d in "$@"
//usr/bin/dracut@307(dropindirs_sort): [[ -e /usr/lib/dracut/dracut.conf.d/50-nss-softokn.conf ]]
//usr/bin/dracut@308(dropindirs_sort): printf '%s\n' /usr/lib/dracut/dracut.conf.d/50-nss-softokn.conf
//usr/bin/dracut@309(dropindirs_sort): continue 2
/usr/bin/dracut@720(): for f in $(dropindirs_sort ".conf" "$confdir" "$dracutbasedir/dracut.conf.d")
/usr/bin/dracut@721(): check_conf_file /usr/lib/dracut/dracut.conf.d/01-dist.conf
/usr/bin/dracut@284(check_conf_file): grep -H -e '^[^#]*[+]=\("[^ ]\|.*[^ ]"\)' /usr/lib/dracut/dracut.conf.d/01-dist.conf
/usr/bin/dracut@722(): [[ -e /usr/lib/dracut/dracut.conf.d/01-dist.conf ]]
/usr/bin/dracut@722(): . /usr/lib/dracut/dracut.conf.d/01-dist.conf
//usr/lib/dracut/dracut.conf.d/01-dist.conf@4(): i18n_vars='/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP'
//usr/lib/dracut/dracut.conf.d/01-dist.conf@5(): i18n_default_font=eurlatgr
//usr/lib/dracut/dracut.conf.d/01-dist.conf@6(): i18n_install_all=yes
//usr/lib/dracut/dracut.conf.d/01-dist.conf@9(): stdloglvl=3
//usr/lib/dracut/dracut.conf.d/01-dist.conf@10(): sysloglvl=5
//usr/lib/dracut/dracut.conf.d/01-dist.conf@11(): install_optional_items+=' vi /etc/virc ps grep cat rm '
//usr/lib/dracut/dracut.conf.d/01-dist.conf@12(): prefix=/
//usr/lib/dracut/dracut.conf.d/01-dist.conf@13(): systemdutildir=/usr/lib/systemd
//usr/lib/dracut/dracut.conf.d/01-dist.conf@14(): systemdsystemunitdir=/usr/lib/systemd/system
//usr/lib/dracut/dracut.conf.d/01-dist.conf@15(): systemdsystemconfdir=/etc/systemd/system
//usr/lib/dracut/dracut.conf.d/01-dist.conf@16(): udevdir=/usr/lib/udev
//usr/lib/dracut/dracut.conf.d/01-dist.conf@17(): hostonly=yes
//usr/lib/dracut/dracut.conf.d/01-dist.conf@18(): hostonly_cmdline=no
//usr/lib/dracut/dracut.conf.d/01-dist.conf@19(): early_microcode=yes
//usr/lib/dracut/dracut.conf.d/01-dist.conf@20(): reproducible=yes
/usr/bin/dracut@720(): for f in $(dropindirs_sort ".conf" "$confdir" "$dracutbasedir/dracut.conf.d")
/usr/bin/dracut@721(): check_conf_file /usr/lib/dracut/dracut.conf.d/02-rescue.conf
/usr/bin/dracut@284(check_conf_file): grep -H -e '^[^#]*[+]=\("[^ ]\|.*[^ ]"\)' /usr/lib/dracut/dracut.conf.d/02-rescue.conf
/usr/bin/dracut@722(): [[ -e /usr/lib/dracut/dracut.conf.d/02-rescue.conf ]]
/usr/bin/dracut@722(): . /usr/lib/dracut/dracut.conf.d/02-rescue.conf
//usr/lib/dracut/dracut.conf.d/02-rescue.conf@1(): dracut_rescue_image=yes
/usr/bin/dracut@720(): for f in $(dropindirs_sort ".conf" "$confdir" "$dracutbasedir/dracut.conf.d")
/usr/bin/dracut@721(): check_conf_file /usr/lib/dracut/dracut.conf.d/50-nss-softokn.conf
/usr/bin/dracut@284(check_conf_file): grep -H -e '^[^#]*[+]=\("[^ ]\|.*[^ ]"\)' /usr/lib/dracut/dracut.conf.d/50-nss-softokn.conf
/usr/bin/dracut@722(): [[ -e /usr/lib/dracut/dracut.conf.d/50-nss-softokn.conf ]]
/usr/bin/dracut@722(): . /usr/lib/dracut/dracut.conf.d/50-nss-softokn.conf
//usr/lib/dracut/dracut.conf.d/50-nss-softokn.conf@3(): add_dracutmodules+=' nss-softokn '
/usr/bin/dracut@725(): DRACUT_PATH='/sbin /bin /usr/sbin /usr/bin'
/usr/bin/dracut@727(): for i in $DRACUT_PATH
/usr/bin/dracut@728(): rl=/sbin
/usr/bin/dracut@729(): '[' -L /sbin ']'
//usr/bin/dracut@730(): readlink -f /sbin
/usr/bin/dracut@730(): rl=/usr/sbin
/usr/bin/dracut@732(): [[ '' != *:/usr/sbin* ]]
/usr/bin/dracut@733(): NPATH+=:/usr/sbin
/usr/bin/dracut@727(): for i in $DRACUT_PATH
/usr/bin/dracut@728(): rl=/bin
/usr/bin/dracut@729(): '[' -L /bin ']'
//usr/bin/dracut@730(): readlink -f /bin
/usr/bin/dracut@730(): rl=/usr/bin
/usr/bin/dracut@732(): [[ :/usr/sbin != *:/usr/bin* ]]
/usr/bin/dracut@733(): NPATH+=:/usr/bin
/usr/bin/dracut@727(): for i in $DRACUT_PATH
/usr/bin/dracut@728(): rl=/usr/sbin
/usr/bin/dracut@729(): '[' -L /usr/sbin ']'
/usr/bin/dracut@732(): [[ :/usr/sbin:/usr/bin != *:/usr/sbin* ]]
/usr/bin/dracut@727(): for i in $DRACUT_PATH
/usr/bin/dracut@728(): rl=/usr/bin
/usr/bin/dracut@729(): '[' -L /usr/bin ']'
/usr/bin/dracut@732(): [[ :/usr/sbin:/usr/bin != *:/usr/bin* ]]
/usr/bin/dracut@736(): export PATH=/usr/sbin:/usr/bin
/usr/bin/dracut@736(): PATH=/usr/sbin:/usr/bin
/usr/bin/dracut@737(): unset NPATH
/usr/bin/dracut@740(): ((  0  ))
/usr/bin/dracut@741(): ((  0  ))
/usr/bin/dracut@742(): ((  0  ))
/usr/bin/dracut@743(): ((  0  ))
/usr/bin/dracut@744(): ((  0  ))
/usr/bin/dracut@745(): ((  0  ))
/usr/bin/dracut@746(): ((  0  ))
/usr/bin/dracut@749(): ((  0  ))
/usr/bin/dracut@750(): ((  0  ))
/usr/bin/dracut@751(): ((  0  ))
/usr/bin/dracut@752(): ((  0  ))
/usr/bin/dracut@753(): ((  0  ))
/usr/bin/dracut@755(): [[ -n '' ]]
/usr/bin/dracut@756(): [[ ! -n 3 ]]
/usr/bin/dracut@757(): stdloglvl=3
/usr/bin/dracut@758(): (( stdloglvl > 6 ))
/usr/bin/dracut@759(): (( stdloglvl < 0 ))
/usr/bin/dracut@761(): [[ -n '' ]]
/usr/bin/dracut@762(): [[ -n '' ]]
/usr/bin/dracut@763(): [[ -n '' ]]
/usr/bin/dracut@763(): do_strip=yes
/usr/bin/dracut@764(): [[ -n '' ]]
/usr/bin/dracut@765(): [[ -n '' ]]
/usr/bin/dracut@765(): do_hardlink=yes
/usr/bin/dracut@766(): [[ -n '' ]]
/usr/bin/dracut@767(): [[ / = \/ ]]
/usr/bin/dracut@767(): unset prefix
/usr/bin/dracut@768(): [[ -n '' ]]
/usr/bin/dracut@769(): [[ -n '' ]]
/usr/bin/dracut@770(): [[ -n '' ]]
/usr/bin/dracut@771(): [[ yes == \y\e\s ]]
/usr/bin/dracut@771(): [[ -n no ]]
/usr/bin/dracut@772(): [[ -n '' ]]
/usr/bin/dracut@773(): [[ -n '' ]]
/usr/bin/dracut@774(): [[ -n '' ]]
/usr/bin/dracut@775(): [[ -n '' ]]
/usr/bin/dracut@776(): [[ -n '' ]]
/usr/bin/dracut@777(): [[ -n /usr/lib/dracut ]]
/usr/bin/dracut@778(): [[ -n '' ]]
/usr/bin/dracut@778(): fw_dir=/lib/firmware/updates:/lib/firmware:/lib/firmware/5.10.12-200.fc33.x86_6
/usr/bin/dracut@779(): [[ -n '' ]]
/usr/bin/dracut@780(): [[ -n '' ]]
/usr/bin/dracut@780(): tmpdir=
/usr/bin/dracut@781(): [[ -n '' ]]
/usr/bin/dracut@781(): tmpdir=/var/tmp
/usr/bin/dracut@782(): [[ -n '' ]]
/usr/bin/dracut@783(): [[ -n '' ]]
/usr/bin/dracut@784(): [[ -n '' ]]
/usr/bin/dracut@785(): [[ -n '' ]]
/usr/bin/dracut@786(): [[ -n '' ]]
/usr/bin/dracut@787(): [[ -n '' ]]
/usr/bin/dracut@788(): [[ -n yes ]]
/usr/bin/dracut@789(): [[ -n '' ]]
/usr/bin/dracut@789(): early_microcode_image_dir=('/boot')
/usr/bin/dracut@790(): [[ -n '' ]]
/usr/bin/dracut@791(): early_microcode_image_name=('intel-uc.img' 'intel-ucode.img' 'amd-uc.img' 'amd-ucode.img' 'early_ucode.cpio' 'microcode.cpio')
/usr/bin/dracut@792(): [[ -n '' ]]
/usr/bin/dracut@793(): [[ -n '' ]]
/usr/bin/dracut@794(): [[ -n '' ]]
/usr/bin/dracut@795(): [[ -n '' ]]
/usr/bin/dracut@796(): [[ -n '' ]]
/usr/bin/dracut@797(): [[ -n '' ]]
/usr/bin/dracut@798(): [[ -n '' ]]
/usr/bin/dracut@800(): [[ -n /boot/initramfs-5.10.12-200.fc33.x86_6.img ]]
/usr/bin/dracut@849(): export DRACUT_FIRMWARE_PATH=/lib/firmware/updates:/lib/firmware:/lib/firmware/5.10.12-200.fc33.x86_6
/usr/bin/dracut@849(): DRACUT_FIRMWARE_PATH=/lib/firmware/updates:/lib/firmware:/lib/firmware/5.10.12-200.fc33.x86_6
/usr/bin/dracut@850(): fw_dir='/lib/firmware/updates /lib/firmware /lib/firmware/5.10.12-200.fc33.x86_6'
/usr/bin/dracut@853(): [[ -n '' ]]
/usr/bin/dracut@863(): DRACUT_COMPRESS_BZIP2=bzip2
/usr/bin/dracut@864(): DRACUT_COMPRESS_LBZIP2=lbzip2
/usr/bin/dracut@865(): DRACUT_COMPRESS_LZMA=lzma
/usr/bin/dracut@866(): DRACUT_COMPRESS_XZ=xz
/usr/bin/dracut@867(): DRACUT_COMPRESS_GZIP=gzip
/usr/bin/dracut@868(): DRACUT_COMPRESS_PIGZ=pigz
/usr/bin/dracut@869(): DRACUT_COMPRESS_LZOP=lzop
/usr/bin/dracut@870(): DRACUT_COMPRESS_ZSTD=zstd
/usr/bin/dracut@871(): DRACUT_COMPRESS_LZ4=lz4
/usr/bin/dracut@872(): DRACUT_COMPRESS_CAT=cat
/usr/bin/dracut@874(): [[ '' = \c\a\t ]]
/usr/bin/dracut@878(): [[ -n '' ]]
/usr/bin/dracut@880(): for i in $DRACUT_COMPRESS_PIGZ $DRACUT_COMPRESS_GZIP $DRACUT_COMPRESS_LZ4 $DRACUT_COMPRESS_LZOP $ $DRACUT_COMPRESS_ZSTD $DRACUT_COMPRESS_LZMA $DRACUT_COMPRESS_XZ $DRACUT_COMPRESS_LBZIP2 $OMPRESS_BZIP2 $DRACUT_COMPRESS_CAT
/usr/bin/dracut@881(): command -v pigz
/usr/bin/dracut@882(): compress=pigz
/usr/bin/dracut@883(): break
/usr/bin/dracut@885(): [[ pigz = cat ]]
/usr/bin/dracut@891(): case $compress in
/usr/bin/dracut@906(): [[ pigz = pigz ]]
/usr/bin/dracut@907(): compress='pigz -9 -n -T -R'
/usr/bin/dracut@925(): [[ yes = yes ]]
/usr/bin/dracut@925(): hostonly=-h
/usr/bin/dracut@926(): [[ -h != \-\h ]]
/usr/bin/dracut@928(): case $hostonly_mode in
/usr/bin/dracut@930(): [[ -n -h ]]
/usr/bin/dracut@930(): hostonly_mode=sloppy
/usr/bin/dracut@941(): [[ yes == yes ]]
/usr/bin/dracut@941(): DRACUT_REPRODUCIBLE=1
/usr/bin/dracut@943(): case "${drivers_dir}" in
//usr/bin/dracut@958(): realpath -e /var/tmp
/usr/bin/dracut@958(): readonly TMPDIR=/var/tmp
/usr/bin/dracut@958(): TMPDIR=/var/tmp
/usr/bin/dracut@959(): '[' -d /var/tmp ']'
/usr/bin/dracut@964(): findmnt --raw -n --target /var/tmp --output=options
/usr/bin/dracut@964(): grep -q noexec
//usr/bin/dracut@969(): mktemp -p /var/tmp/ -d -t dracut.XXXXXX
/usr/bin/dracut@969(): readonly DRACUT_TMPDIR=/var/tmp/dracut.FS4L0y
/usr/bin/dracut@969(): DRACUT_TMPDIR=/var/tmp/dracut.FS4L0y
/usr/bin/dracut@970(): '[' -d /var/tmp/dracut.FS4L0y ']'
/usr/bin/dracut@980(): trap '
    ret=$?;
    [[ $keep ]] && echo "Not removing $DRACUT_TMPDIR." >&2 || { [[ $DRACUT_TMPDIR ]] && rm -rf -- "$DRACUT_TMPDIR"; };
    exit $ret;
    ' EXIT
/usr/bin/dracut@983(): trap 'exit 1;' SIGINT
/usr/bin/dracut@985(): readonly initdir=/var/tmp/dracut.FS4L0y/initramfs
/usr/bin/dracut@985(): initdir=/var/tmp/dracut.FS4L0y/initramfs
/usr/bin/dracut@986(): mkdir /var/tmp/dracut.FS4L0y/initramfs
/usr/bin/dracut@988(): [[ yes = yes ]]
/usr/bin/dracut@989(): readonly early_cpio_dir=/var/tmp/dracut.FS4L0y/earlycpio
/usr/bin/dracut@989(): early_cpio_dir=/var/tmp/dracut.FS4L0y/earlycpio
/usr/bin/dracut@990(): mkdir /var/tmp/dracut.FS4L0y/earlycpio
/usr/bin/dracut@993(): [[ -n '' ]]
/usr/bin/dracut@993(): [[ -n '' ]]
/usr/bin/dracut@993(): export DRACUT_RESOLVE_LAZY=1
/usr/bin/dracut@993(): DRACUT_RESOLVE_LAZY=1
/usr/bin/dracut@995(): [[ -n '' ]]
/usr/bin/dracut@1002(): [[ -f /usr/lib/dracut/dracut-version.sh ]]
/usr/bin/dracut@1003(): . /usr/lib/dracut/dracut-version.sh
//usr/lib/dracut/dracut-version.sh@1(): DRACUT_VERSION=050-64.git20200529.fc33
/usr/bin/dracut@1006(): [[ -f /usr/lib/dracut/dracut-init.sh ]]
/usr/bin/dracut@1007(): . /usr/lib/dracut/dracut-init.sh
//usr/lib/dracut/dracut-init.sh@20(): export LC_MESSAGES=C
//usr/lib/dracut/dracut-init.sh@20(): LC_MESSAGES=C
//usr/lib/dracut/dracut-init.sh@22(): [[ 1000 = \0 ]]
//usr/lib/dracut/dracut-init.sh@25(): export 'DRACUT_CP=cp --reflink=auto --sparse=auto --preserve=mode,timestamps,links -dfr'
//usr/lib/dracut/dracut-init.sh@25(): DRACUT_CP='cp --reflink=auto --sparse=auto --preserve=mode,timestamps,links -dfr'
//usr/lib/dracut/dracut-init.sh@34(): [[ -n /usr/lib/dracut ]]
//usr/lib/dracut/dracut-init.sh@41(): is_func dinfo
//usr/lib/dracut/dracut-init.sh@42(): . /usr/lib/dracut/dracut-logger.sh
///usr/lib/dracut/dracut-logger.sh@21(): __DRACUT_LOGGER__=1
//usr/lib/dracut/dracut-init.sh@43(): dlog_init
//usr/lib/dracut/dracut-logger.sh@107(dlog_init): local __oldumask
//usr/lib/dracut/dracut-logger.sh@108(dlog_init): local ret=0
//usr/lib/dracut/dracut-logger.sh@108(dlog_init): local errmsg
//usr/lib/dracut/dracut-logger.sh@109(dlog_init): '[' -z 3 ']'
//usr/lib/dracut/dracut-logger.sh@110(dlog_init): '[' -z 5 ']'
//usr/lib/dracut/dracut-logger.sh@111(dlog_init): '[' -z '' ']'
//usr/lib/dracut/dracut-logger.sh@111(dlog_init): kmsgloglvl=0
//usr/lib/dracut/dracut-logger.sh@113(dlog_init): '[' -n '' ']'
//usr/lib/dracut/dracut-logger.sh@115(dlog_init): '[' -z '' ']'
//usr/lib/dracut/dracut-logger.sh@116(dlog_init): '[' -w '' ']'
//usr/lib/dracut/dracut-logger.sh@116(dlog_init): fileloglvl=0
//usr/lib/dracut/dracut-logger.sh@141(dlog_init): ((  1000  != 0  ))
//usr/lib/dracut/dracut-logger.sh@142(dlog_init): kmsgloglvl=0
//usr/lib/dracut/dracut-logger.sh@143(dlog_init): sysloglvl=0
//usr/lib/dracut/dracut-logger.sh@146(dlog_init): ((  0 > 0  ))
//usr/lib/dracut/dracut-logger.sh@165(dlog_init): (( 0 > 0 ))
//usr/lib/dracut/dracut-logger.sh@165(dlog_init): (( 0 > 0  ))
//usr/lib/dracut/dracut-logger.sh@174(dlog_init): local lvl
//usr/lib/dracut/dracut-logger.sh@174(dlog_init): local maxloglvl_l=0
//usr/lib/dracut/dracut-logger.sh@175(dlog_init): for lvl in $stdloglvl $sysloglvl $fileloglvl $kmsgloglvl
//usr/lib/dracut/dracut-logger.sh@176(dlog_init): ((  3 > 0  ))
//usr/lib/dracut/dracut-logger.sh@176(dlog_init): maxloglvl_l=3
//usr/lib/dracut/dracut-logger.sh@175(dlog_init): for lvl in $stdloglvl $sysloglvl $fileloglvl $kmsgloglvl
//usr/lib/dracut/dracut-logger.sh@176(dlog_init): ((  0 > 3  ))
//usr/lib/dracut/dracut-logger.sh@175(dlog_init): for lvl in $stdloglvl $sysloglvl $fileloglvl $kmsgloglvl
//usr/lib/dracut/dracut-logger.sh@176(dlog_init): ((  0 > 3  ))
//usr/lib/dracut/dracut-logger.sh@175(dlog_init): for lvl in $stdloglvl $sysloglvl $fileloglvl $kmsgloglvl
//usr/lib/dracut/dracut-logger.sh@176(dlog_init): ((  0 > 3  ))
//usr/lib/dracut/dracut-logger.sh@178(dlog_init): readonly maxloglvl=3
//usr/lib/dracut/dracut-logger.sh@178(dlog_init): maxloglvl=3
//usr/lib/dracut/dracut-logger.sh@179(dlog_init): export maxloglvl
//usr/lib/dracut/dracut-logger.sh@182(dlog_init): (( 3 < 6 ))
//usr/lib/dracut/dracut-logger.sh@182(dlog_init): (( 0 < 6 ))
//usr/lib/dracut/dracut-logger.sh@182(dlog_init): (( 0 < 6 ))
//usr/lib/dracut/dracut-logger.sh@182(dlog_init): (( 0 < 6 ))
//usr/lib/dracut/dracut-logger.sh@183(dlog_init): unset dtrace
//usr/lib/dracut/dracut-logger.sh@187(dlog_init): (( 3 < 5 ))
//usr/lib/dracut/dracut-logger.sh@187(dlog_init): (( 0 < 5 ))
//usr/lib/dracut/dracut-logger.sh@187(dlog_init): (( 0 < 5 ))
//usr/lib/dracut/dracut-logger.sh@187(dlog_init): (( 0 < 5 ))
//usr/lib/dracut/dracut-logger.sh@188(dlog_init): unset ddebug
//usr/lib/dracut/dracut-logger.sh@192(dlog_init): (( 3 < 4 ))
//usr/lib/dracut/dracut-logger.sh@192(dlog_init): (( 0 < 4 ))
//usr/lib/dracut/dracut-logger.sh@192(dlog_init): (( 0 < 4 ))
//usr/lib/dracut/dracut-logger.sh@192(dlog_init): (( 0 < 4 ))
//usr/lib/dracut/dracut-logger.sh@193(dlog_init): unset dinfo
//usr/lib/dracut/dracut-logger.sh@197(dlog_init): (( 3 < 3 ))
//usr/lib/dracut/dracut-logger.sh@204(dlog_init): (( 3 < 2 ))
//usr/lib/dracut/dracut-logger.sh@209(dlog_init): (( 3 < 1 ))
//usr/lib/dracut/dracut-logger.sh@214(dlog_init): '[' -n '' ']'
//usr/lib/dracut/dracut-logger.sh@216(dlog_init): return 0
//usr/lib/dracut/dracut-init.sh@46(): [[ -n /var/tmp/dracut.FS4L0y/initramfs ]]
//usr/lib/dracut/dracut-init.sh@51(): [[ -d /var/tmp/dracut.FS4L0y/initramfs ]]
//usr/lib/dracut/dracut-init.sh@55(): [[ -n 5.10.12-200.fc33.x86_6 ]]
//usr/lib/dracut/dracut-init.sh@60(): srcmods=/lib/modules/5.10.12-200.fc33.x86_6/
//usr/lib/dracut/dracut-init.sh@62(): [[ -n '' ]]
//usr/lib/dracut/dracut-init.sh@69(): export srcmods
//usr/lib/dracut/dracut-init.sh@71(): [[ -n /lib/firmware/updates:/lib/firmware:/lib/firmware/5.10.12-200.fc33.x86_6 ]]
//usr/lib/dracut/dracut-init.sh@74(): [[ -n '' ]]
//usr/lib/dracut/dracut-init.sh@75(): hookdirs='cmdline pre-udev pre-trigger netroot '
//usr/lib/dracut/dracut-init.sh@76(): hookdirs+='initqueue initqueue/settled initqueue/online initqueue/finished initqueue/timeout '
//usr/lib/dracut/dracut-init.sh@77(): hookdirs+='pre-mount pre-pivot cleanup mount '
//usr/lib/dracut/dracut-init.sh@78(): hookdirs+='emergency shutdown-emergency pre-shutdown shutdown '
//usr/lib/dracut/dracut-init.sh@79(): export hookdirs
//usr/lib/dracut/dracut-init.sh@82(): DRACUT_LDD=ldd
//usr/lib/dracut/dracut-init.sh@83(): DRACUT_TESTBIN=/bin/sh
//usr/lib/dracut/dracut-init.sh@84(): DRACUT_LDCONFIG=ldconfig
//usr/lib/dracut/dracut-init.sh@86(): . /usr/lib/dracut/dracut-functions.sh
///usr/lib/dracut/dracut-functions.sh@20(): export LC_MESSAGES=C
///usr/lib/dracut/dracut-functions.sh@20(): LC_MESSAGES=C
//usr/lib/dracut/dracut-init.sh@89(): [[ -n '' ]]
//usr/lib/dracut/dracut-init.sh@91(): [[ -d /lib64 ]]
//usr/lib/dracut/dracut-init.sh@92(): libdirs+=' /lib64'
//usr/lib/dracut/dracut-init.sh@93(): [[ -d /usr/lib64 ]]
//usr/lib/dracut/dracut-init.sh@93(): libdirs+=' /usr/lib64'
///usr/lib/dracut/dracut-init.sh@99(): ldconfig_paths
///usr/lib/dracut/dracut-functions.sh@84(ldconfig_paths): ldconfig -pN
///usr/lib/dracut/dracut-functions.sh@84(ldconfig_paths): grep -E -v '/(lib|lib64|usr/lib|usr/lib64)/[^/]*$'
///usr/lib/dracut/dracut-functions.sh@84(ldconfig_paths): sed -n 's,.* => \(.*\)/.*,\1,p'
///usr/lib/dracut/dracut-functions.sh@84(ldconfig_paths): sort
///usr/lib/dracut/dracut-functions.sh@84(ldconfig_paths): uniq
//usr/lib/dracut/dracut-init.sh@99(): libdirs+=' /usr/lib64/iscsi'
//usr/lib/dracut/dracut-init.sh@101(): export libdirs
//usr/lib/dracut/dracut-init.sh@165(): [[ -n '' ]]
///usr/lib/dracut/dracut-init.sh@166(): find_binary dracut-install
///usr/lib/dracut/dracut-functions.sh@43(find_binary): local _delim
///usr/lib/dracut/dracut-functions.sh@44(find_binary): local _path
///usr/lib/dracut/dracut-functions.sh@45(find_binary): local l
///usr/lib/dracut/dracut-functions.sh@46(find_binary): local p
///usr/lib/dracut/dracut-functions.sh@47(find_binary): [[ -z dracut-install ]]
///usr/lib/dracut/dracut-functions.sh@47(find_binary): _delim=/
///usr/lib/dracut/dracut-functions.sh@49(find_binary): [[ dracut-install == *.so* ]]
///usr/lib/dracut/dracut-functions.sh@63(find_binary): [[ dracut-install == */* ]]
///usr/lib/dracut/dracut-functions.sh@70(find_binary): for p in $DRACUT_PATH
///usr/lib/dracut/dracut-functions.sh@71(find_binary): _path=/sbin/dracut-install
///usr/lib/dracut/dracut-functions.sh@72(find_binary): [[ -L /sbin/dracut-install ]]
///usr/lib/dracut/dracut-functions.sh@72(find_binary): [[ -x /sbin/dracut-install ]]
///usr/lib/dracut/dracut-functions.sh@70(find_binary): for p in $DRACUT_PATH
///usr/lib/dracut/dracut-functions.sh@71(find_binary): _path=/bin/dracut-install
///usr/lib/dracut/dracut-functions.sh@72(find_binary): [[ -L /bin/dracut-install ]]
///usr/lib/dracut/dracut-functions.sh@72(find_binary): [[ -x /bin/dracut-install ]]
///usr/lib/dracut/dracut-functions.sh@70(find_binary): for p in $DRACUT_PATH
///usr/lib/dracut/dracut-functions.sh@71(find_binary): _path=/usr/sbin/dracut-install
///usr/lib/dracut/dracut-functions.sh@72(find_binary): [[ -L /usr/sbin/dracut-install ]]
///usr/lib/dracut/dracut-functions.sh@72(find_binary): [[ -x /usr/sbin/dracut-install ]]
///usr/lib/dracut/dracut-functions.sh@70(find_binary): for p in $DRACUT_PATH
///usr/lib/dracut/dracut-functions.sh@71(find_binary): _path=/usr/bin/dracut-install
///usr/lib/dracut/dracut-functions.sh@72(find_binary): [[ -L /usr/bin/dracut-install ]]
///usr/lib/dracut/dracut-functions.sh@72(find_binary): [[ -x /usr/bin/dracut-install ]]
///usr/lib/dracut/dracut-functions.sh@78(find_binary): [[ -n '' ]]
///usr/lib/dracut/dracut-functions.sh@79(find_binary): type -P dracut-install
//usr/lib/dracut/dracut-init.sh@166(): DRACUT_INSTALL=
//usr/lib/dracut/dracut-init.sh@169(): [[ -n '' ]]
//usr/lib/dracut/dracut-init.sh@169(): [[ -x /usr/lib/dracut/dracut-install ]]
//usr/lib/dracut/dracut-init.sh@170(): DRACUT_INSTALL=/usr/lib/dracut/dracut-install
//usr/lib/dracut/dracut-init.sh@181(): DRINSTALLPARTS=0
//usr/lib/dracut/dracut-init.sh@182(): for i in $DRACUT_INSTALL
//usr/lib/dracut/dracut-init.sh@183(): DRINSTALLPARTS=1
//usr/lib/dracut/dracut-init.sh@186(): [[ 1 = 1 ]]
//usr/lib/dracut/dracut-init.sh@186(): [[ -x /usr/lib/dracut/dracut-install ]]
//usr/lib/dracut/dracut-init.sh@191(): [[ -h == \-\h ]]
//usr/lib/dracut/dracut-init.sh@192(): [[ -n '' ]]
//usr/lib/dracut/dracut-init.sh@193(): export DRACUT_KERNEL_MODALIASES=/var/tmp/dracut.FS4L0y/modaliases
//usr/lib/dracut/dracut-init.sh@193(): DRACUT_KERNEL_MODALIASES=/var/tmp/dracut.FS4L0y/modaliases
//usr/lib/dracut/dracut-init.sh@194(): /usr/lib/dracut/dracut-install --kerneldir /lib/modules/5.10.12-200.fc33.x86_6/ --modalias
//usr/lib/dracut/dracut-init.sh@198(): [[ -n 1 ]]
///usr/lib/dracut/dracut-init.sh@1002(): ln --help
//usr/lib/dracut/dracut-init.sh@1002(): [[ Usage: ln [OPTION]... [-T] TARGET LINK_NAME
  or:  ln [OPTION]... TARGET
  or:  ln [OPTION]... TARGET... DIRECTORY
  or:  ln [OPTION]... -t DIRECTORY TARGET...
In the 1st form, create a link to TARGET with the name LINK_NAME.
In the 2nd form, create a link to TARGET in the current directory.
In the 3rd and 4th forms, create links to each TARGET in DIRECTORY.
Create hard links by default, symbolic links with --symbolic.
By default, each destination (name of new link) should not already exist.
When creating hard links, each TARGET must exist.  Symbolic links
can hold arbitrary text; if later resolved, a relative link is
interpreted in relation to its parent directory.

Mandatory arguments to long options are mandatory for short options too.
      --backup[=CONTROL]      make a backup of each existing destination file
  -b                          like --backup but does not accept an argument
  -d, -F, --directory         allow the superuser to attempt to hard link
                                directories (note: will probably fail due to
                                system restrictions, even for the superuser)
  -f, --force                 remove existing destination files
  -i, --interactive           prompt whether to remove destinations
  -L, --logical               dereference TARGETs that are symbolic links
  -n, --no-dereference        treat LINK_NAME as a normal file if
                                it is a symbolic link to a directory
  -P, --physical              make hard links directly to symbolic links
  -r, --relative              create symbolic links relative to link location
  -s, --symbolic              make symbolic links instead of hard links
  -S, --suffix=SUFFIX         override the usual backup suffix
  -t, --target-directory=DIRECTORY  specify the DIRECTORY in which to create
                                the links
  -T, --no-target-directory   treat LINK_NAME as a normal file always
  -v, --verbose               print name of each linked file
      --help     display this help and exit
      --version  output version information and exit

The backup suffix is '~', unless set with --suffix or SIMPLE_BACKUP_SUFFIX.
The version control method may be selected via the --backup option or through
the VERSION_CONTROL environment variable.  Here are the values:

  none, off       never make backups (even if --backup is given)
  numbered, t     make numbered backups
  existing, nil   numbered if numbered backups exist, simple otherwise
  simple, never   always make simple backups

Using -s ignores -L and -P.  Otherwise, the last option specified controls
behavior when a TARGET is a symbolic link, defaulting to -P.

GNU coreutils online help: <https://www.gnu.org/software/coreutils/>
Report any translation bugs to <https://translationproject.org/team/>
Full documentation <https://www.gnu.org/software/coreutils/ln>
or available locally via: info '(coreutils) ln invocation' == *--relative* ]]
/usr/bin/dracut@1015(): [[ '' != yes ]]
/usr/bin/dracut@1015(): [[ -d /lib/modules/5.10.12-200.fc33.x86_6/ ]]
/usr/bin/dracut@1016(): printf '%s\n' 'dracut: Cannot find module directory /lib/modules/5.10.12-200.fc33.x86_6/'
dracut: Cannot find module directory /lib/modules/5.10.12-200.fc33.x86_6/
/usr/bin/dracut@1017(): printf '%s\n' 'dracut: and --no-kernel was not specified'
dracut: and --no-kernel was not specified
/usr/bin/dracut@1018(): exit 1
/usr/bin/dracut@2(): ret=1
/usr/bin/dracut@3(): [[ -n '' ]]
/usr/bin/dracut@3(): [[ -n /var/tmp/dracut.FS4L0y ]]
/usr/bin/dracut@3(): rm -rf -- /var/tmp/dracut.FS4L0y
/usr/bin/dracut@4(): exit 1

Sorry, I made a cut-and-paste error. Should have been 5.10.12-200.fc33.x86_64 not 5.10.12-200.fc33.x86_6 in the command above. I’ve edited it — can you try again?

Hmmm, seems similar to Can't start after update - #5 by lilington

Looks like I’m getting the same outcome. Maybe I’m missing a directory?