Hello to everyone,
I thought that I should give fedora 35 a try, so I flashed it useing rufus to a USB stick using the GPT partition scheme.
I already have Windows 10 (UEFI) installed on an SSD hard drive (sdb) and I wanted to try dual booting, but since there was not as much space as I would like on sdb, I decided to install Fedora 35 on another SSD hard drive (sdd).
I freed 250 Gigs off that hard drive (sdd), and made them unallocated. Then I booted to the usb stick on UEFI mode and I installed Fedora 35 on that unallocated space.
More specifically, through the graphical interface I chose sdd as the installation destination, and for storage configuration I selected custom. Then I created two mount points :
/boot/efi with 512M capacity and
/ with the rest of the unallocated space, I clicked done and let the installer do it’s job. Fast forward to after the restart and I have no internet connection.
End of intro:------------------------
I should note that I have no wireless card on my pc, and I have an ethernet cable connected. On the top right corner I see a questionmark on the connection.
the output of
eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 2a02:587:940a:b8c7:fa8b:dbdf:d424:1a8c prefixlen 64 scopeid 0x0<global> inet6 fe80::5577:208a:3f22:ba9e prefixlen 64 scopeid 0x20<link> ether bc:ee:7b:77:51:37 txqueuelen 1000 (Ethernet) RX packets 100 bytes 10037 (9.8 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 59 bytes 9984 (9.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xf7200000-f7220000 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 27 bytes 2852 (2.7 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 27 bytes 2852 (2.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
The output of
ping -c 2 184.108.40.206
ping: connect: Network is unreachable
Any ideas on what might be wrong here?